AT&T 265 - Manual (Page 31)

29
CALLER ID OPERATION
About Caller Identification
When the first call is received, the telephone sets the current time and date
automatically, and updates them each time a new call comes in. The unit
automatically adjusts for winter time.
When not in use, the unit displays the current time and date, the number of
new calls, and the total number of calls (up to 80) in the call log.
For each incoming call, the screen displays the following information between
the first and second rings:
• The caller’s name (16 letters are sent by your telephone company),
• The caller’s area code and telephone number (the area code is not
displayed if it is programmed as the home area code),
• The time and date of the call,
• There were other calls from this number in the call log, and
• The position of the call in the call log.
If an incoming call is answered before the information appears on the screen,
no information will be stored or displayed.
Time call was
received
Date call was
received
The position of the call in
call log
The caller’s area code
and telephone number
The caller’s name
Unreviewed call information
Low battery
A repeat call from this
caller