AT&T 265 User Manual

Page 24

FEATURE SETTINGS

Set Time/Date

This feature sets the time and the date displayed on the screen when the

telephone is in idle mode.

1. After setting the local area codes (or from the idle screen, press OPTIONS

seven times), the screen will show:

2. When the hour is flashing, use the T and S keys to scroll through the list

of numbers from 1 to 12 to select the right number for the hour and AM or

PM. Press DISPLAY DIAL to save the entry and advance to the next setting.

3. When the minutes start flashing, use the T and S keys to scroll through

the list of numbers from 00 to 59 to select the right number for the

minutes. Press DISPLAY DIAL to save the entry and advance to the next

setting.

4. When the month is flashing, use the T and S keys to scroll through the

list of numbers from 1 to 12 to select the right number for the month.

Press DISPLAY DIAL to save the entry and advance to the next setting.

5. When the date is flashing, use the T and S keys to scroll through the list

of numbers from 1 to 31 to select the right number for the date. Press

DISPLAY DIAL to return to step 2 above to make any corrections, or press

OPTIONS to save the entry and advance to the call waiting setting.

NOTE: When entering the hours, after 11AM is 12PM, and after 11PM is

12AM.