AT&T 265 - Manual (Page 22)

20
FEATURE SETTINGS
Set Home Area Code (HAC)
Home area code is the area code associated with your telephone number. It is
necessary to program a home area code so the telephone can properly display
incoming calls and dial the telephone numbers from the call log.
1. After setting the contrast (or press OPTIONS twice in idle screen), the
screen will display:
2. Press S or T until the screen displays the first digit of your home area
code. Do not use the keypad to enter digits.
3. Press DISPLAY DIAL to save the digit and advance to the next digit.
4. Repeat steps 2 and 3 for the second and third digits of your home area
code.
5. Press OPTIONS to save the home area code and continue to set the local
area code.
If you dial… For… Then, in steps 2-4
7 digits
(phone number only,
no area code)
Enter your own area
code.
10 digits
(area code + phone
number)
OR
11 digits
1 + area code +
phone number)
Calls within your own
area code
Enter 0 0 0, then follow
the directions in Set
Local Area Codes on
page 20.
NOTE: There is no visual or audible confirmation when setting a new home
area code.