AT&T 265 - Manual (Page 14)

12
INSTALLATION
Desktop Installation
1. Remove the mounting adapter from the telephone
base by pressing down with your thumbs as
indicated by the arrows in the diagram.
2. Turn the mounting adapter upside down so that
the telephone line cord channel leads the line out
from the top of the telephone base.
3. Replace the mounting adapter by aligning it as shown.
Push it downward with your thumbs as indicated by the
arrows in the diagram and ensure that it is securely
locked into place.
4. Plug one end of the telephone line cord into the
telephone line jack at the bottom of the telephone base.
5. Thread the cord through the channel and out of the mounting area as
shown.
6. Connect the other end to a modular telephone jack on the wall.