Allied Telesis AR44xS series - Manual (Page 53)

Features in 276-02 53
Version 276-05
C613-10474-00 REV D
CR00012620 Bridging - By default, when the router receives a tagged packet on an Eth or VLAN interface
and bridges it, the bridge strips out the packet’s VLAN tag. This enhancement
enables you to set the bridge to instead retain the tag, by using off, no or false
in the new command:
set bridge stripvlantag={on|off|yes|no|true|false}
The default is on. To see whether stripping is turned on or off, use the command:
show bridge
and check the new StripVlantag entry.
Y Y Y - - - - - - -
CR00012692 L2TP - The connection between the router or switch, acting as an LNS, and a third party
peer, acting as an LAC, can sometimes fail during PPP link negotiation. Frequent
negotiation failures can indicate a compatibility problem between the third party
peer and Proxy Authentication responses from the router or switch. With this
enhancement, you can now disable Proxy Authentication on the router or switch
for situations where the third party equipment is not compatible. Use
proxyauth=off in the command:
add l2tp ip=ipadd[-ipadd] ppptemplate=0..31
[number={off|on|startup}] [pre13={off|on}]
[proxyauth={off|on}]
[tosreflect={off|on|false|true|no|yes}]
The default for proxyauth is on. Proxy Authentication should not be disabled
unless necessary.
To see whether Proxy Authentication is turned on or off, use the command:
show l2tp ip
and check the new Proxy Authentication entry.
Y Y Y Y Y - - Y Y Y
CR Module Level Description AR44x
S /
AR4
50S
AR7x5 AR750
S
Rapi
er
i
A
T-
880
0
A
T-
860
0
A
T-
870
0XL
A
T-
894
8
A
T-
990
0
A
T-
980
0