Allied Telesis AR44xS series - Manual (Page 45)

Features in 276-02 45
Version 276-05
C613-10474-00 REV D
CR00011888 Switch 3 When a trunk group on a 48-port switch spanned multiple switch instances, the
switch sometimes did not transmit traffic. The ports in each instance are:
Models
First instance Second instance
Rapier 48i, AT-8748XL, AT-8648T /2SP 1-24, 49 25-48, 50
AT-8848 1-24, 50 25-48, 49
This issue has been resolved.
- - - Y Y Y Y - - -
CR00011931 VLAN 3 After users added multiple ports to one private VLAN as tagged ports, those ports
could not be added to another private VLAN as tagged ports by using a single
command (they could be added one port at a time).
This issue has been resolved.
- - - Y Y Y Y Y Y -
CR00011943 IP Gateway 3 Previously, it was possible to modify settings for the default local IP interface
when it had no IP address. However, these settings were invalid so the router or
switch did not save them.
This issue has been resolved. Settings for the default local IP interface now cannot
be changed unless the interface has an IP address assigned to it.
Y Y Y Y Y Y Y Y Y Y
CR00011969 OSPF 3 When a user changed the asexternal setting for OSPF, sometimes OSPF did not
correctly update the LSA database.
This issue has been resolved.
Y Y Y Y Y Y Y Y Y Y
CR00012014 Switch 3 Setting a port’s speed to a fixed speed (such as 100mfull) should also disable
automdi on the port. Previously, if the switch set the port speed to a fixed speed
during start-up before the switch had fully initialised, auto MDI was not disabled.
This issue has been resolved.
- - - - - - - Y Y -
CR Module Level Description AR44x
S /
AR4
50S
AR7x5 AR750
S
Rapi
er
i
A
T-
880
0
A
T-
860
0
A
T-
870
0XL
A
T-
894
8
A
T-
990
0
A
T-
980
0