Atlantis Land A02-RA144-W300N - Manual (Page 48)

WebShare 144WN
A02-RA144-W300N Pag. 38
5.6 Wireless
This section introduces the wireless LAN and some basic configurations. Wireless
LANs can be as simple as two computers with wireless LAN cards communicating
in a peer-to-peer network or as complex as a number of computers with wireless
LAN cards communicating through access points which bridge network traffic to
the wired LAN.
Click on
“
Interface Setup
” then “
Wireless
”.
Access Point Settings
Label Description
Access Point Default setting is set to Activated . If you do not have any
wireless, both 802.11g and 802.11b, device in your network,
select
Deactived .
Channel ID The range of radio frequencies used by IEEE 802.11b/g/n
wireless devices is called a channel. Select a channel from
the drop-down list box.
Beacon Interval The Beacon Interval value indicates the frequency interval of
the beacon. Enter a value between 20 and 1000. A beacon is