Apple iMac (17-inch Mid 2006) - Manual (Page 90)

iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Logic Board 0
Replacing the Logic Board
Pull all cables up and away from the logic board bay and gently place down the logic board
so that all screw holes are aligned with screw mounts in the chassis.
Replacement Note: The logic board should rest on the screw mounts without any binding
or bowing—if it doesn’t, adjust any cables that are interfering with the logic board.
Install the optical drive.
Secure the logic board by installing the machine screws, and then installing three self-
tapping screws, marked with an “S.”
Connect all the cables. Note: The speaker cable is attached under the right speaker.
1.
2.
3.
4.