Apple iMac (17-inch Mid 2006) - Manual (Page 38)

iMac (17-inch Mid 2006/Late 2006) Take Apart — Lower EMI Shield — 3
Removing the Lower EMI Shield
Carefully peel the lower EMI shield off the bottom edge and side of the rear housing. Use a
black stick to help peel back the shield.
If replacing a torn or damaged lower EMI shield, peel the lower EMI shield off the bottom
edge of the display.
Replacing the Lower EMI Shield
Position the lower EMI shield over the bottom of the unit so that the holes in the shield are
properly aligned.
Press the sticky, top edge of the EMI shield onto the bottom side of the display panel. The
crease in the EMI shield should align with the edge of the panel.
Fold down the EMI shield and press it firmly over the bottom edge of the rear housing. Use a
black stick to rub out wrinkles and ensure that the EMI shield adheres firmly along all edges.
Replace the front bezel.
Replace the access door.
1.
2.
1.
2.
3.
4.
5.