Agilent Technologies G1978B - Manual (Page 5)

Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide 5
Content
1 Installation 7
Installation 8
Step 1. Prepare to install 8
Step 2. Install the HV control PCA and cables 9
Changing Sources 13
To remove the multimode source 13
To convert from multimode to ESI, APCI or APPI 14
To convert from ESI, APCI or APPI to the multimode source 15
2 Verification 21
To verify sensitivity for 6120 Quad - G1978B Multimode, Positive SIM
Modes 22
To verify sensitivity for 6130 and 6140 Quads - G1978B Multimode, Positive SIM
Modes 24
To verify sensitivity for 6130 and 6140 Quads - G1978B Multimode, Positive
Scan Modes 27
To verify sensitivity for the G1978B Multimode using Multiple FIA method in
Mixed Mode operation 30
To do an autotune 32
Example of multimode verification report 33
3 Methods 35
To setup a method to use the multimode source 36
To create a method for positive/negative mixed mode operation 37
To create a method for alternating ESI and APCI operation 39