Agilent Technologies G1978B User Manual
Page 10
10
Multimode Source for 6100 Series Single Quad LC/MS Set-Up Guide
1
Installation
Step 2. Install the HV control PCA and cables
Figure 4
Connecting the valve PCA to the multimode HV power supply.
6 Install the APCI HV power supply. The APCI HV power supply is located at
the end of the AUX Module.
7 Connect ribbon cable between valve PCA and Vcap/Vchamber power
supply.
Figure 5
Connecting the valve PCA to the Vcap/Vchamber power supply.
8 Connect the Vcap and Vchamber cables to the Vcap/Vchamber power
supply.