AT&T ML17959 - Manual (Page 30)

25
Menu setup
Incoming message length
Use this feature to set the recording time allowed for incoming messages.
The message length is one minute by default.
When the telephone is idle, press MENu.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select the desired line. Press ENTER.
Press or to scroll to Ans sys setup. Press ENTER.
Press or to scroll to Msg length. Press ENTER.
Press or to select 1 min, 2 min or 4 min.
Press ENTER to save your selection. The telephone
plays a confirmation tone and returns to the previous menu.
Remote code
If you want to remotely access your mailbox from any touch-tone telephone,
set the remote code to
on and enter a three-digit (000-999) remote code. If
you do not use this feature, set the remote code to off. The default remote
access code is 500. To change the settings:
When the telephone is idle, press MENu.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select a desired mailbox. Press ENTER.
Press or to scroll to Ans sys setup. Press ENTER.
Press or to scroll to Remote code. Press ENTER.
Press or to select on or off.
If you select on:
Press ENTER.
Press the dialing keys ( 0-9) to enter a three-
digit code. Press /
REPEAT
or /
SKIP
to move
the cursor to the left or right. Press DELETE to
backspace and erase a digit.
Press
ENTER to save the digits.
-oR-
If you select
off, press ENTER to save the setting.
The telephone plays a confirmation tone and returns to the previous menu.
NOTE: The remote code must be different from the priority code.
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
5.
6.
a.
b.
c.
aNS SyS SETUP M1
Call screening
# of rings
Msg length
1
MSG LENGTH
1 min
2 min
4 min
1
aNS SyS SETUP M1
Call screening
# of rings
Msg length
1
MSG LENGTH
1 min
2 min
4 min
1
MaILbOx 1
Record memo
answer ON/OFF
ans sys setup
1
aNS SyS SETUP M1
# of rings
Msg length
Remote code
1
REMOTE CODE
On
Off
1
REMOTE CODE
50_
1
MaILbOx 1
Record memo
answer ON/OFF
ans sys setup
1
aNS SyS SETUP M1
# of rings
Msg length
Remote code
1
REMOTE CODE
On
Off
1
REMOTE CODE
50_
1
Answering system settings