AT&T ML17959 - Manual (Page 28)

23
Menu setup
To delete announcement A or B:
When the telephone is idle, press MENu.
Press or to scroll to Answering sys. Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2 to
select the desired line. Press ENTER.
Press or to scroll to Announcement.
Press ENTER.
Press or to scroll to Annc A or Annc B.
Press ENTER.
Press or to scroll to Delete. Press ENTER. The telephone plays a
confirmation tone and returns to the previous menu.
When your announcement is deleted, calls are answered with the default
announcement.
Announcement A and B time settings
These settings allow you to set different time intervals for when to play your
two different announcements (see
Announcement selection on page 21).
The default start times for announcements A and B are 8:00am and 5:00pm,
respectively. To change the settings:
When the telephone is idle, press MENu.
Press or to scroll to Answering sys.
Press ENTER.
Press or to scroll to Mailbox 1 or Mailbox 2.
Press ENTER.
Press or to scroll to Announcement.
Press ENTER.
Press or to scroll to Set annc A time or
Set annc B time. Press ENTER.
Use the dialing keys to enter the time. To enter a
number that is less than 10, you have to enter a 0
before the digit. Press
/
REPEAT
or /
SKIP
to move
the cursor to the left or right.
-oR-
Press or to scroll to the desired digit. Press
ENTER to move on to set the
next digit. Press /
REPEAT
or /
SKIP
to move the cursor to the left or right.
Press or to select AM or PM.
Press ENTER to save your selection. The telephone plays a confirmation
tone and returns to the previous menu.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
7.
8.
annc a
Play
Record
Delete
1
Deleting...
1
annc a
Play
Record
Delete
1
Deleting...
1
aNNOUNCEMENT M1
annc b
Set annc a time
Set annc b time
1
aNNC a bEGINS
08:00 aM
HH:MM aM/PM
1
aNNC b bEGINS
05:00 PM
HH:MM aM/PM
1
aNNOUNCEMENT M1
annc b
Set annc a time
Set annc b time
1
aNNC a bEGINS
08:00 aM
HH:MM aM/PM
1
aNNC b bEGINS
05:00 PM
HH:MM aM/PM
1
Answering system settings