AMD Socket AM2+ Quad Core Processor 790GX - Manual (Page 36)

31
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day of
the month, the alarm will power on your system every day at the specified time .
Date (of month)
You can choose which month the system will boot up. Set to 0, to boot every day.
Time (hh:mm:ss)
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.
3-9 Miscellaneous
Configuration
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Init Display First PCIEx
Reset Configuration Date Disabled
Resource Controlled by Auto [ESCD]
* IRQ Resource Press Enter
PCI /VGA Palette SNOOP Disabled
Assign IRQ for VGA Enabled
Assign IRQ for USB Enabled
PCI Latency Timer (CLK) [64]
* PCI Express Relative Items
Maximum Payload Size 4096
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Reset Configuration Data
If you enable this item and restart the system, any Plug and Play configuration data stored in
the BIOS Setup is cleared from memory.
Init Display First
Use this item to specify whether your graphics adapter is installed in one of the PCI E slots or
is integrated on the motherboard. If a PCI E graphics card is installed, the onboard VGA will
be disabled.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
Assign IRQ For USB
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity ofthe
selected IRQ always awakens the system.