AMD Socket AM2+ Quad Core Processor 790GX - Manual (Page 28)

23
If the controller of HDD interface is SCSI, the selection shall be “None”.
If the controller of HDD interface is CD-ROM, the selection shall be “None”
Access Mode
The settings are Auto Normal, Large, and LBA.
Cylinder number of cylinders
Head number of heads
Precomp
write precomp
Landing Zone landing zone
Sector number of sectors
3-5 Advanced BIOS Feature
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Item Help
Hard Disk Boot Priority Press Enter
Virus Warning Disabled
CPU Internal Cache Enabled
External Cache Enabled
Quick Power on self Test Enabled
First Boot Device Hard Disk
Second Boot Device CDROM
Third Boot Device Floppy
Boot other Device Enabled
Boot Up Floppy Seek Disable
Boot Up NumLock Status On
Typematic Rate Setting Disabled
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option Setup
APIC Mode Enabled
MPS Version Control For OS 1.4
OS Select For DRAM > 64MB Non-OS2
HDD S.M.A.R.T. Capability Disabled
Menu Level >
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Hard Disk Boot Priority
The selection is for you to choose the hard disk drives priorities to boot from.
Virus Warning
The selection Allow you to choose the VIRUS Warning
feature for IDE Hard Disk boot sector protection. If this function is enabled and someone
attempt to write data into this area, BIOS will show a warning message on screen and alarm
beep.
Disabled (default) No warning message to appear when anything attempts to access the
boot sector or hard disk partition table.
Enabled Activates automatically when the system boots up causing a warning
message to appear when anything attempts to access the boot sector
of hard disk partition table.
CPU Internal Cache
The default value is Enabled.
Enabled (default) Enable cache
Disabled Disable cache
Note: The internal cache is built in the processor.