beautypg.com

7 integrated peripherals, 7-1 super io device – AMD Socket AM2+ Quad Core Processor 790GX User Manual

Page 32

background image




27

3-7 Integrated

Peripherals

Phoenix – AwardBIOS CMOS Setup Utility

Integrated Peripherals

Item Help

CMIX-SB750 Revision 2.5.0

Superio Function Setup Press Enter

South onchip PCI Device Press Enter

South Onchip IDE Device Press Enter

South Onchip SATA Device Press Enter


Menu Level >

↑↓→← Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

3-7-1

Super IO Device

Phoenix – AwardBIOS CMOS Setup Utility

Super IO Function Setup

Item Help

Onboard FDC Controller Enabled

Onboard Serial Port 1 3F8/IRQ4

UART Mode Select IrDA

* Irda Duplex Mode Half

PWROM After PWR-Fail [OFF]


Menu Level >>

↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults


Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDD) installed on the system
board and you wish to use it. If you install add-on FDC or the system has no floppy drive,
select Disabled in this field. The settings are: Enabled and Disabled.
Onboard Serial Port2
Select an address and corresponding interrupt for the first and the second serial ports. The
settings are: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, Disabled, Auto.
UART Mode Select
This item allows you to determine which InfraRed(IR) function of the onboard I/O chip, this
functions uses.
IrDA Duplex Mode
This field is available when UART Mode is set to either ASKIR or IrDA. This item enables
you to determine the infrared function of the onboard infrared chip. The options are Full and
Half (default). Full-duplex means that you can transmit and send information simultaneously.
Half-duplex is the transmission of data in both directions , but only one direction at a time.
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that Provides Standard, ECP,
and EPP features. It has the following option:

Disabled

(3BCH/IRQ7)/

Line Printer port 0

(278H/IRQ5)/

Line Printer port 2

This manual is related to the following products: