Sony HDR-PJ810 - Manual (Page 411)

Digital HD Video Camera Recorder
HDR-PJ810/PJ810E/PJ820/PJ820E
Self-diagnosis display
If indicators appear on the LCD monitor or in the viewfinder, check the following. If the problem persists even after you
have tried to fix a couple of times, contact your Sony dealer or local authorized Sony service facility. When you contact
them, give them the complete error code beginning with C or E displayed on the LCD monitor.
You may hear a melody when an important warning indicator appears on the LCD monitor.
C:(or E:) : (Self-diagnosis display)
C:04:
You are not using the designated battery pack. Make sure to use the designated battery pack.
Connect the AC Adaptor and the USB cable firmly.
C:06:
The battery pack temperature is high. Change the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and operate this product again.
E: :
Follow the steps from 2 on “If you have problems.”
(Battery level warning)
The battery pack is nearly used up.
Depending on the operating environment or battery conditions, may flash even with about 20 minutes of power
remaining.
(Warning indicator pertaining to battery pack temperature)
The battery pack temperature is high. Change the battery pack or place it in a cool place.
(Warning indicator pertaining to memory card)
Slow flashing
Free spaces for recording images are running out.
No memory card is inserted.
Fast flashing
Help Guide
Troubleshooting
411