Sony HDR-PJ810 - Manual (Page 301)

Digital HD Video Camera Recorder
HDR-PJ810/PJ810E/PJ820/PJ820E
24p Mode (HDR-PJ810E/PJ820E)
You can record 24p movies with changing the signal format.
1. - [Setup] - [ General Settings] - [24p Mode] -
If you want to return the system to 50i mode, select in the [Cancel 24p Mode] screen.
Note
This product reboots each time you change the setting.
When you change the setting, formatting the recording media is required.
When you select [24p Mode], the following settings will be limited.
The movie recording format is limited to AVCHD 24p (FX, FH).
Depending on the connected TV, images may not be played back normally because the video signal output from this
product is in the NTSC format.
You cannot set [ Frame Rate].
Notes on use
4-489-505-11(1)
Copyright 2014 Sony Corporation
Help Guide
How to Use
301