If you have problems, Help guide – Sony HDR-PJ810 User Manual

Page 346

Digital HD Video Camera Recorder

HDR-PJ810/PJ810E/PJ820/PJ820E

If you have problems

If you run into any problems using this product, follow the steps below.

1. Check the items under “Troubleshooting,” and inspect this product.

2. Disconnect the power source, attach the power source again after about 1 minute, and turn this product on.

3. Perform [Initialize].

If you select [Initialize], all settings, including the clock setting, are reset.

4. Contact your Sony dealer or local authorized Sony service facility.

Note

You may need to initialize or change the current internal memory of this product depending on the problem.

If you do so, the data stored on the internal memory will be deleted. Be sure to save the data on the internal memory

on other media (backup) before sending this product for repair. We will not compensate you for any loss of internal

memory data.

During repair, we may check a minimum amount of data stored on the internal memory in order to investigate the

problem. However, your Sony dealer will neither copy nor retain your data.