Sony DPT-S1 - Manual (Page 17)

17
Adding Content
Transferring Documents
You can directly transfer content by drag-and-drop
from your computer.
Tip
 You can transfer files other than PDF; however, only
PDF files (.pdf) are displayed.
1
Connect the Digital Paper device to your
computer using the supplied USB cable.
The message [This device is correctly recognized
by the computer] will display when a USB cable
connection is established.
2
Add a document from your computer.
For Windows users:
From your computer, click on the “Start” menu

“Computer” or “My Computer”  double-click the
“DPT-S1” drive, then drag and drop data onto the
“DPT-S1” drive.
For Mac users:
From your computer, double-click the “DPT-S1”
drive, and drag and drop data onto the “DPT-S1”
drive.
3
When transfer is complete, use the Safely
Remove Hardware function of your computer
before disconnecting the USB cable from the
device and your computer.
Documents will be sent to the [Documents]
application.
Transferring documents to your computer
1
Connect Digital Paper device via USB to the
computer.
A “DPT-S1” device is indicated as an external
device to the computer.
2
Move a document from DPT-S1 to the intended
folder on the computer by drag and drop.
Note
 You can also transfer content via microSD card.
 Do not delete the .dps_device_system folder or its
sub-folder that were created by the Digital Paper
device on the “DPT-S1” drive or the microSD card.
 If you disconnect the USB cable while data is being
transferred, data corruption may occur. To
disconnect the Digital Paper device from your
computer, be sure to perform the following.
For Windows users:
Use the Safely Remove Hardware function of your
computer before disconnecting the USB cable from
the device and your computer.
For Mac users:
Click the “Eject” icon, finish the removing
procedure, then disconnect the cable.
Adding/Getting Content