Sony DCR-PC101 - Manual (Page 85)

85
Editing
You can duplicate selected scenes (programs) for editing onto a tape without operating
the VCR.
Scenes can be selected by frame. You can set up to 20 programs.
Your camcorder can dub on “Memory Stick”s. See page 143 for more information.
Before operating the Digital program editing on tapes
recorded on other equipment
Step 1 Connecting to the VCR (p. 85).
Step 2 Setting the VCR to operate (p. 86, 90).
Step 3 Adjusting the synchronization of the VCR (p. 92).
When you dub using the same VCR again, you can skip steps 2 and 3.
Using the Digital program editing function on tapes recorded
on other equipment
Operation 1 Making the program (p. 94).
Operation 2 Performing Digital program editing (Dubbing a tape) (p. 96).
Note
When editing digital video, the operation signals to the VCR cannot be sent with
LANC .
Step 1: Connecting to the VCR
You can connect either the A/V connecting cable or the i.LINK cable .
When you use the A/V connecting cable, connect the devices as illustrated in page 83.
When you use the i.LINK cable, connect the devices as illustrated in page 84.
If you connect using an i.LINK cable
With digital-to-digital connection, video and audio signals are transmitted in digital
form for high-quality editing.
Dubbing only desired scenes
– Digital program editing (on tapes)
Unwanted
scene
Unwanted
scene
Switch the order