Sony DCR-PC101 - Manual (Page 164)

164
When connecting to your computer with the DV port
Your computer must have a DV port and editing software installed that can read video
signals.
Viewing images recorded on a “Memory Stick”
When connecting to your computer with the USB port
There are two methods of USB connection, NORMAL and PTP. The default setting is
NORMAL.
Here we explain how to use the camcorder with a standard USB connection (NORMAL).
See page 166 when using Windows and page 180 when using Macintosh.
You can also use a “Memory Stick” Reader/Writer (optional).
When connecting to your computer without a USB port
Use an optional floppy disk adaptor for Memory Stick or a PC card adaptor for Memory
Stick.
When purchasing an accessory, check its catalog beforehand for the recommended
operating environment.
USB port
(USB)
USB cable (supplied)
Push into the end
Viewing images with your computer – Introduction
:Signal flow
DV
is marked on this side
i.LINK cable (optional)
DV port