Sony DCR-PC101 - Manual (Page 58)

58
Using special effects – Digital effect
(1) Set the POWER switch to CAMERA, then press FN and select PAGE2.
(2) Press DIG EFFT. The screen to select a desired digital effect mode appears.
(3) Press a desired digital effect mode. In STILL and LUMI., the still image is
stored in memory.
(4) Press –/+ to adjust the effect.
Items to adjust
STILL The rate of the still image you want to superimpose on the moving
picture
FLASH The interval of flash motion
LUMI. The color scheme of the area in the still image which is to be swapped
with a moving picture
TRAIL The vanishing time of the incidental image
SLOW SHTR Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
OLD MOVIE No adjustment necessary
(5) Press OK to return to PAGE2.
To return to FN
Press EXIT.
To cancel the digital effect
Press OFF to return to PAGE2.
1 2~4
FN
LUMI. – +
OK OFF
DIG
EFFT
DIG EFFT DIG EFFT
STILL
SLOW
SHTR
OLD
MOVIE
OFF OK
LUMI. FLASH TRAIL
The bar appears when setting following
digital effect modes: STILL, FLASH,
LUMI., TRAIL.