Sony DSC-W200 - Manual (Page 69)

69
C
u
st
om
izi
ng the s
e
tt
ings
Settings For details on the operation 1 page 60
Shooting Settings — Shooting Settings 1
The default settings are marked with .
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The AF illuminator emits red light allowing the camera to focus easily when the shutter button
is pressed halfway, until the focus is locked. The
indicator appears at this time.
• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will
not be achieved. (A distance of up to approximately 2.8 m (9 feet 2 1/4 inches) (zoom: W)/2.2 m (7 feet
2 5/8 inches) (zoom: T) is recommended.)
• Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the
center of the subject.
• You cannot use the AF illuminator when:
– When Focus preset is set (page 46).
– When (Twilight mode) or
(Landscape mode) or (Fireworks mode) is selected in the Scene
mode.
– When [Face Detection] is set to [On].
– When [Conversion Lens] is not set to [Off].
• When you use AF illuminator, the normal AF range finder frame is disabled and new AF range finder
frame is displayed by a dotted line. AF operates with priority on subjects located near the center of the
frame.
• The AF illuminator emits very bright light. Although there are no problems with safety, do not look
directly into the AF illuminator emitter at close range.
With reference to the grid lines, you can easily set a subject in a horizontal/vertical position.
• The grid lines are not recorded.
AF Illuminator
Auto Uses the AF illuminator.
Off Does not use AF illuminator.
Grid Line
On Displays the grid lines.
Off Does not display the grid line.