Sony DSC-G1 - Manual (Page 39)

39
U
si
n
g
t
h
e
sh
oo
ti
ng
f
u
n
ct
ions
Shooting menu For details on the operation 1 page 29
• Note that the image tends to become noisier as the ISO sensitivity number increases.
• [ISO] is set to [AUTO] (Auto) in the Scene Selection mode.
• When shooting under brighter conditions, the camera automatically increases its tone reproduction and
helps prevent images to become whitish (excluding when [ISO] is set to [ISO 80]).
Selects whether the camera performs continuous shooting or not when you press the shutter button.
AUTO (Auto) Select a large number when shooting in dark locations or
shooting a subject moving at high speed, or select a small
number to obtain high image quality.
ISO 80
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1000
REC Mode: Selecting the continuous shooting method
(Normal) Does not shoot continuously.
(Burst) Records the maximum number of images in succession (refer
to the following table) when you press and hold down the
shutter button.
• When “Recording...” disappears, you can shoot the next image.
• The flash is set to (Flash forced off).
BRK ±0.3EV (BRK ±0.3EV) Records a series of three images with the exposure values
automatically shifted (Exposure Bracket).
The larger the bracket step value, the larger the shift of the
exposure value.
• When you cannot decide the correct exposure, shoot in the
Exposure Bracket mode, shifting the exposure value. You can
select the image with the best exposure afterward.
• When [Camera] is set to [AUTO], you cannot use Exposure
Bracket.
• The flash is set to (Flash forced off).
BRK ±0.7EV (BRK ±0.7EV)
BRK ±1.0EV (BRK ±1.0EV)