ADTRAN IQ 310 T1 NIM - Manual

IQ 310 T1 NETWORK INTERFACE MODULE (NIM) P/N 1202802L1
For more detailed documentation, visit us online at www.adtran.com
Quick Start Guide, 61202802L1-13A, March 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) Copyright © 2004 ADTRAN, All Rights Reserved
S PECIFICATIONS
Network Interface
Framing: SF / ESF with auto detection
Line Coding: AMI / B8ZS
Input signal: to -36 dB
Clock Source: network or internal
Line Build Out: 0, -7.5dB, -15 dB, -22.5dB
Data Rate: 56k or 64k
Connector: RJ-48
Compliance
FCC Part 15, Class A
FCC Part 68
Industry Canada CS03
UL and CUL
S PECIFICATIONS ( CONTINUED )
Environmental
Operating Temperature: 0 to 50 C
Storage Temperature: -40 to 85 C
Relative Humidity: Up to 95% non-condensing
I NSTALLATION I NSTRUCTIONS
1. Remove the power from the unit.
2. Slide the option module into the option slot until the module is firmly
seated against the front of the chassis.
3. Secure the pins at both edges of the module.
4. Connect the cables to the associated device(s).
5. Complete installation of the Base Unit.
6. Restore power to the unit.