Sony MSAC-US40 - Manual (Page 19)

19-GB
Connecting this unit to your computer
P Note
Be sure to install the supplied software before you connect this unit to your
computer. Restart your computer following installation.
Connect the USB port on this unit to a USB port on your computer using
the special USB cable supplied.
On the special USB cable
A connector: This is plugged into the USB port on the computer. Any
ports can be used if the computer is provided with multiple
USB ports.
Mini-B connector: This is plugged into the USB port on this unit.
1
Firmly insert the Mini-B connector of the USB cable into the
USB port on this unit as far as it will go.
2
Plug the A connector of the USB cable into a USB port on your
computer.
• The “Found New Hardware Wizard” starts up and installation of
the driver begins. Depending on the OS, the driver installation may
take place automatically.
• The location of the USB port on the computer differs with the
computer used.
• When using a computer with multiple USB ports, do not connect
other devices, with the exception of a standard mouse and keyboard,
to USB ports at the same time as this unit. When using a desktop
computer, use a USB port on the main unit of the computer. For
details, see “Recommended ways for connecting this unit” on page
20.
USB port
A connector
Mini-B
connector
Access lamp
USB port
* Serial number
(8-digit number on the
backside of this unit)