Sony FDR-AX1 - Manual (Page 64)

Specifications 64
Ap
pend
ic
es
AUDIO OUT connectors
Pin connectors
-10 dBu (at load impedance 47 k
Ω
(kilohms)), Output impedance with less than
2.2 k
Ω (kilohms)
(0 dBu = 0.775 Vrms)
HDMI OUT connector
HDMI connector (Type A)
i (headphones) connector
Stereo-minijack (Ø 3.5 mm)
INPUT1/INPUT2 connectors
XLR 3-pin, female,
MIC: -50 dBu: 3 k
Ω (kilohms)
LINE: +4 dBu: 10 k
Ω (kilohms)
(0 dBu = 0.775 Vrms)
USB connector
Mass-storage: mini-B
Host: Type A
Remote connector
Stereo mini-minijack (Ø 2.5 mm)
LCD screen
Picture
8.8 cm (3.5 type, aspect ratio 16:9)
Total dot number
1 229 000 (854 Ч 480 Ч 3 [RGB])
Viewfinder
Picture
0.45 type, aspect ratio 16:9
Total dot number
Approx. 1 226 880
General
Power requirements
DC 7.2 V (battery pack)
DC 12 V 2.5 A (AC Adaptor)
Average power consumption
During camera recording using the internal
microphone and LCD with normal brightness
NTSC Area:
4K: 14.5W (29.97P, 60Mbps)
HD: 15.7W (59.94P, 50Mbps)
PAL Area:
4K: 13.8W (25P, 60Mbps)
HD: 14.9W (50P, 50Mbps)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
Camcorder body only (including the
projecting parts):
189 mm × 193 mm × 362 mm
(7 1/2 in. × 7 5/8 in. × 14 3/8 in.) (w/h/d)
When recording (including the projecting
parts):
189 mm × 193 mm × 413 mm
(7 1/2 in. × 7 5/8 in. × 16 3/8 in.) (w/h/d)
(With the accessories (battery pack (NP-
F970), large eyecup) attached.)
Mass (approx.)
Camcorder body only:
2 440 g (87 oz)
When recording:
2 770 g (98 oz) (With the accessories (battery
pack (NP-F970), large eyecup) attached.)
AC Adaptor AC-NB12A
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.65 A - 0.35 A
Power consumption
30 W
Output voltage
DC 12 V*
Operating temperature
0 °C to 45 °C (32 °F to 113 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
49.5 mm × 28 mm × 99.5 mm
(1 31/32 in. × 1 1/8 in. × 3 15/16 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
200 g (7.1 oz) excluding the power cord
(mains lead)
* See the label on the AC Adaptor for other
specifications.
Charger AC-VL1
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
22 W
Output voltage
DC 8.4 V*
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)