Sony FDR-AX1 - Manual (Page 44)

Setup Menu List 44
Se
tt
ings
Audio menu
Audio
Menu items Sub items and setting values Contents
Audio Input
Setting for audio
inputs
INPUT1 Reference
–60dB / –50dB / –40dB
Selects the reference input level for when the INPUT1 switch
is set to MIC.
INPUT2 Reference
–60dB / –50dB / –40dB
Selects the reference input level for when the INPUT2 switch
is set to MIC.
INT MIC Sensitivity
Normal / High
Selects the sensitivity of the internal microphone.
INPUT1 Wind Filter
On / Off
Turns on/off the wind filter for CH1.
INPUT2 Wind Filter
On / Off
Turns on/off the wind filter for CH2.
INT MIC Wind Filter
On / Off
Turns on/off the wind filter for the internal stereo
microphone.
Limiter Mode
On / Off
Turns the limiter on/off when a loud signal is input while
setting audio input level manually.
AGC Mode
Mono / Stereo
Selects the cross-channel linkage of the AGC.
1KHz Tone
On / Off
Turn the 1-kHz reference tone signal on/off.
Audio Output
Setting for audio
outputs
Headphone Out
Mono / Stereo
Selects the headphones output, “Mono” or “Stereo.”
Video menu
Video
Menu items Sub items and setting values Contents
Output Format
Setting for the
output format
HDMI
The setting value changes
depending on the setting of
“Video Format” in “Rec
Format” of the System menu.
The default options are as
follows.
NTSC model:
3840×2160P / 1920×1080P /
1920×1080i / 720×480P
PAL model:
3840×2160P / 1920×1080P /
1920×1080i / 720×576P
Sets the resolution of the HDMI output.
SET: Execute this function.
VIDEO Displays the resolution and scan method. (Display only)