Sony FDR-AX1 - Manual (Page 48)

Connecting External Monitors and Recording Devices 48
E
x
ter
n
a
l De
v
ic
e
s
Conn
ec
ti
on
To display recording/playback pictures on an
external monitor, select the output signal and use
an appropriate cable for the monitor to be
connected.
An output signal from the camcorder can be
recorded when a recording device is connected.
The same status information and menus can be
displayed on the external monitor as those on the
viewfinder screen.
According to the signal fed to the monitor, set
“Output Display” (page 45) in the Video menu to
“On.”
HDMI OUT connector (Type A connector)
Set the on/off setting of the output, and output
format in the Video menu (page 44).
Use a supplied HDMI cable for connection.
When you use a commercially available HDMI
cable, use a high speed HDMI cable.
VIDEO OUT connector (Pin connector)
Use the supplied A/V connecting cable for
connection.
For details, see “Video formats and output
signals” (page 59).
External Devices Connection
Connecting External Monitors and Recording Devices