Sony FDR-AX1 - Manual (Page 62)

Error/Warning Indications 62
Ap
pend
ic
es
* “Media(B)” for the card in slot B.
Unknown Media(A)*
Please Change A partitioned memory card or one that contains recorded
clips exceeding the number permitted with this camcorder is
loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.
Media Error
Media(A) Needs to be
Restored* An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
Media Error
Cannot Record to
Media(A)* Recording cannot be done, because the memory card is
defective.
Because playback may be possible, it is recommended to
replace it with another card after copying the clips, as
required.
Media Error
Cannot Use Media(A)* Neither recording nor playback can be done, because the
memory card is defective.
It cannot be operated with this camcorder. Replace it with
another card.
Will Switch Slots Soon This is an advanced notice that the camcorder will switch
from the current memory card to the other memory card for
continuous recording.
Cannot Use Media(A)*
Unsupported File
System A card of a different file system or an unformatted card was
inserted. It cannot be used with this camcorder.
Replace it or format it with this camcorder.
Media Error
Playback Halted An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Media(A) Error* Recording cannot be done, because an error occurred with the
memory card.
If this frequently occurs, change the memory card.
Media Reached
Rewriting Limit
Change Media(A)* The memory card comes to the end of its service life. Make a
backup copy and replace the card with another one as soon as
possible. Recording/playback may not be performed properly
if you continue to use the card.
For details, refer to the operating instructions of the memory
card.
Cannot Use Media(A)*
Unsupported File
System A memory card with different file system is inserted.
Replace the card, format it with the camcorder.
Battery Temperature
High Intermittent Flashing The temperature of the battery pack is rising.
Turn off the power and replace the battery pack with another
one or wait until the temperature falls.
Warning indication
on LCD/viewfinder Buzzer Recording
lamp Cause and measures