Sony FDR-AX1 - Manual (Page 34)

Changing Basic Settings 34
Record
ing
When the CH1 switch is set to INT MIC
When the CH1 switch is set to INPUT 1
• When the CH1 switch is set to INPUT 2, the
INPUT 2 source is recorded to CH1.
• When you use a stereo microphone (2 XLR
plugs), connect the L (left) channel plug to the
INPUT 1 jack, and the R (right) channel plug to
the INPUT 2 jack. Set the CH1 switch to
INPUT 1, and the CH2 switch to INPUT 2.
Adjusting the volume
When both the CH1/CH2 switches are set to INT
MIC, left and right channels are linked to the CH1
switch and dial.
1. Set the AUTO/MAN switch (F or I) of
the channel to be adjusted to MAN.
appears on the LCD screen.
2. During recording or standby, turn the
AUDIO LEVEL dial (G or H) of the
channel to be adjusted.
To restore automatic adjustment
Set the AUTO/MAN switch (F or I) of the
manually adjusted channel to AUTO.
Setting the headphone sound
You can select the channel by setting the switch
to CH1 or CH2, to output from the headphone.
See “Headphone Out” in “Audio Output” of
Audio menu on the sound at STEREO MIX
(page 44).
Input source and recorded
channel CH2
switch
setting
INT MIC (L)
INT MIC (R) CH1
CH2
INT MIC (mono)
INPUT 1 CH1
CH2
INT MIC (mono)
INPUT 2 CH1
CH2
Input source and recorded
channel CH2
switch
setting
INPUT 1
INT MIC (mono) CH1
CH2
INPUT 1
CH1
CH2
INPUT 1
INPUT 2 CH1
CH2