Connecting the remote commander to your pc – Sony RM-NX7000 User Manual
Page 10
Connecting the Remote Commander to your PC
You can connect the Remote Commander (RM-NX7000) to your PC w ith the supplied USB cable. When you check the remote control signal of the Action list
programmed for the keys and buttons, or w hen you exchange setting data betw een your PC and the Remote Commander, connect the Remote Commander to
your PC.
Note s
Before connecting the Remote Commander to your PC, be sure to connect the supplied AC pow er adaptor to the Remote Commander.
Do not disconnect the USB cable from your PC w hile your PC is communicating w ith the Remote Commander, as a malfunction may occur.
Do not connect several Remote Commanders to your PC at the same time, as your PC w ill not be able to communicate w ith the Remote Commander.
1.
Conne ct the USB cable to the USB conne ctor of the Re m ote Com m ande r (RM -NX7000).
2.
Conne ct the USB cable to the USB conne ctor of your PC.
Note
When you connect the Remote Commander (RM-NX7000) to your PC for the first time, the USB driver install w izard appears. For further installation details,
refer to the supplied operating instructions.
Page 10