Sony PCWA-A220 - Manual (Page 20)

4. Whe n the Wire le s s Acce s s Point Se tup - Finis h Scre e n appe ars , w ait about 30 s e conds .
Note
The link test is disabled for 30 seconds after the configuration is uploaded because the Access Point is automatically restarted.
You may start the link test w hen the Pow er indicator on the Access Point turns green.
5. Click LINK TEST.
The link test betw een the Access Point and the client is performed using your new configuration.
6. Click FINISH w he n the m e s s age "Link e s tablis he d w ith Acce s s Point" is dis playe d.
The Custom Setup Utility closes.
Note
If an error message appears, open the Custom Setup Utility and check the configuration.
Page 20