Anti blink – Sony DSC-TX1 User Manual
Page 64
Ta
ble
of
Op
e
MENU/Settin
In
64
GB
Anti Blink
When Scene Selection is set to
(Soft Snap) while you are shooting an image, the camera
automatically shoots two images consecutively. The camera will select, display and record the
image which the eyes are not blinked automatically.
1 Lower the lens cover to switch to shooting mode.
2
(REC Mode)
t
(Scene Selection)
t
(Soft Snap)
3
t
(Anti
Blink)
t desired mode
• Anti Blink does not function in the following situations.
– When using the flash
– During burst shooting
– When the Face Detection function does not work
– When the Smile Shutter function is activated
• Sometimes Anti Blink function does not work depending on the situation.
• When the Anti Blink function is set to [Auto] but only images with the subject’s eyes closed are
recorded, the message “Blinked eye detected” is displayed on the LCD screen. Shoot again as necessary.
(Auto)
When Face Detection is active, the Anti Blink function operates so
that images with the subject’s eyes open are recorded.
(Off)
Does not use the Anti Blink function.
Notes