Sony DSC-TX1 - Manual (Page 114)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
114 GB
Viewing an image on a SD TV
You can view images recorded on the camera in standard picture quality by connecting the
camera to an SD (Standard Definition) TV. Refer also to the operating instructions supplied with
the TV.
1 Turn off both the camera and the TV.
2 Connect the camera to the TV with the cable for multi-use terminal
(supplied).
3 Turn on the TV and set the input.
4 Press (Playback) button to turn on the camera.
Images shot with the camera appear on the TV. Touch / displayed on the LCD screen of
this camera to select the desired image.
• When you play back a single image, no icons are displayed on the TV.
• You cannot play back images in [Easy Mode] during TV output.
• When you shoot movies while the camera and a TV are connected, the image being shot is not displayed
on the TV.
• When using the camera abroad, it may be necessary to switch the video signal output to match that of
your TV system (page 100).
Notes
Cable for multi-use terminal (supplied)
1 To the multi connector
(Playback) button
2 To audio/video input jacks