Sony DSC-TX1 - Manual (Page 54)

Ta
ble
of
co
nte
n
ts
Op
e
rat
io
n
S
ear
ch
MENU/Settin
g
s
Se
ar
ch
In
de
x
54 GB
1 Frame a white object such as a piece of paper filling the screen under the
same lighting conditions as you will shoot the subject.
2 t (White Balance) t [One Push Set] t [Capture]
3 The screen momentarily turns black, and when the white balance has
been adjusted and stored in the memory, the recording screen is
displayed again.
• If the indicator flashes while shooting, the white balance is either not set or cannot be set. Use
automatic white balance.
• Do not shake or strike the camera while [One Push Set] is in progress.
• When flash mode is set to [On] or [Slow Synchro], the white balance is adjusted to the condition with the
flash emitting.
• The white references loaded using [White Balance] and [Underwater White Balance] are stored
separately.
To capture the basic white color in [One Push
Set] mode
Notes
z Effects of lighting conditions
The apparent color of the subject is affected by the lighting conditions.
The color tones are adjusted automatically, but you can adjust color tones manually using
the White Balance function.
Weather/lighting Daylight Cloudy Fluorescent Incandescent
Characteristics of
light White (standard) Bluish Green-tinged Reddish