Setup 4, Calibration, For details on the operation 1 page 58 – Sony DSC-T50 User Manual

Page 70

Text mode
Original mode

For details on the operation 1 page 58

Setup 4

Enables you to perform calibration when the touch panel buttons do not react at the
appropriate points where you touch.
Using the paint pen, touch the × mark displayed on the screen.
To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that
point are not effected.

The × mark moves on the screen.
If you fail to press the right spot, the calibration is not performed. Press the × mark again.

Calibration

Touch the "X"

Cancel

1/3