Sony DSC-T50 - Manual (Page 62)

62
For details on the operation 1 page 58 Camera 2
2
The default settings are marked with .
Displays the recorded image on the screen for approximately two seconds immediately after
shooting a still image.
• If you press the shutter button halfway down during this period, the recorded image display disappears
and you can immediately shoot the next image.
Selects the anti-blur mode.
• When shooting movies, [Continuous] is activated even if you select [Shooting].
• You can turn off the anti-blur function using the
(STEADY SHOT) button when (Camera) is not
set to [Auto] (page 22).
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Auto Review
On Use the Auto Review.
Off Does not use Auto Review.
STEADY SHOT
Shooting Activates the anti-blur function when pressing the shutter
button halfway down.
Continuous Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.