130 advanced hotsync, Operations – Sony PEG-N760C User Manual
Page 130
Chapter3
Exchanging and updating data using a HotSync
®
operation
130
Advanced HotSync
®
operations
5
Place your CLIÉ handheld on the cradle and then press the
HotSync
button on the front panel of the cradle.
The HotSync operation starts. This HotSync operation records the
network information about your computer onto your CLIÉ handheld.
6
Check if your computer‘s network information (Primary PC
name and Primary PC address) is entered in your CLIÉ
handheld:
1
Rotate the Jog Dial navigator to select HotSync and then press the
Jog Dial navigator. Or tap the HotSync
icon on the Application
Launcher screen.
The HotSync screen appears.
2
Tap the Menu
icon.
3
Tap Primary PC Setup from the Options menu.
The Primary PC Setup screen is displayed.
4
On your computer, click the HotSync
icon in the Windows task
tray and then select Setup from the shortcut menu.
5
Click the Network tab, then click TCP/IP Settings to open the TCP/
IP Settings screen.
6
Confirm that the Primary PC name and Primary PC address on both
screens displayed in step 3 and 5 match. If they do not, change
the Primary PC name and Primary PC address entered in your CLIÉ
handheld, then tap OK.
7
On your computer, tap OK to close the TCP/IP Settings screen and
the Setup screen.
Preparing your CLIÉ handheld and performing a network HotSync
operation
When dialing into a network (Network Modem Sync)
1
Rotate the Jog Dial navigator to select HotSync and then
press the Jog Dial navigator. Or tap the HotSync
icon on
the Application Launcher screen.
The HotSync screen appears.
2
Tap the Menu
icon.
Continued on next page