Wps push, Details, Cyber-shot user guide – Sony DSC-RX100M2 User Manual
Page 204
![background image](/manuals/441567/204/background.png)
Search
Precautions / About this camera
Top page > Changing settings > Setup menu > WPS Push
WPS Push
If your access point has the WPS button, you can register the access point to the camera easily by
pushing the WPS button.
1. MENU
3
[WPS Push]
2. Press the WPS button on the access point you want to register.
Notes
To use [WPS Push], the security of your access point has to be set to WPA2 or WPA, and support
the WPS push button system. In other cases, such as where security is set to WEP or the WPS
push button system is not supported, register the access point manually.
For details on the functions and settings of your access point, refer to the instruction manual of the
access point, or contact the person who is managing the access point.
Connection may not be established or communication distance may be shorter depending on the
surrounding environment, such as obstacles between the camera and the access point, wall
materials, radio wave conditions, etc. In such cases, change the location of the camera or move the
camera closer to the access point.
Related Topic
Copyright 2013 Sony Corporation
195