Sony ICD-R100PC - Manual (Page 53)

53
Additional Information
Error messages
Message
• Connection Error
“Could not communicate
with IC Recorder. Make
sure that the cable is
connected properly.”
“Data in IC Recorder has
been modified. Please
reconnect.”
Problem/Remedy
• The cable is disconnected.
t Check the connection (pages 12
and 14). Make sure that the IC
recorder is in the stop mode when
making connections.
• Other peripheral devices such as a
printer was connected to the printer
port before the IC recorder was
connected.
t Restart the computer. If the
message still appears, change the
mode setting of the printer port
(page 55).
• Another program has been set to
enable automatic communication to
the printer port at a certain interval.
t If such program is set,
communication with the IC
recorder cannot be made, even if
nothing is connected to the printer
port. Change the program setting
to disable the automatic
communication.
• Malfunction of the IC recorder.
tDisconnect the cable and check to
see if the IC recorder operates
properly.
• The ICD-PCLINK Software may not
be used on some computers due to
differences in hardware
specifications.
• You have disconnected the cable once
and made some changes on the IC
recorder. The latest data must be
transferred to the computer.
Continued