Sony ICD-R100PC - Manual (Page 10)

10
5 Click [Next].
The message “Ready to Install!” appears.
6 Click [Next].
The installation of the software starts.
6
When the message “Place installation disk #2 into the floppy
drive and press the OK button” appears, insert the supplied
floppy disk 2
2 2 2 2 and click [OK].
7
Following the instructions on the screen, insert the supplied
floppy disk 3
3 3 3 3 , and then click [OK].
When the installation is finished, the message “Installation
Completed!” appears.
8
Click [Finish].
Now the installation is completed.
If the message on the screen instructs you to restart the computer, eject
the floppydisk, click [OK] and restart the computer.
Installing the ICD-PCLINK Software (continued)