Allied Telesis AR700 Series - Manual (Page 15)

Features in 275-04 15
Version 275-05
C613-10473-00 REV D
CR00010991 ARP 2 If a user entered the command set ip arprefresh and saved the configuration
with the create config command, the resulting configuration file had an invalid
setting for arprefresh. Instead of arprefresh being yes or no, it was set to
enable or disable, which were not valid options.
This issue has been resolved.
Y Y Y Y Y Y - Y Y Y
CR00011269 SSL 2 When the SSL server had multiple concurrent users, some SSL sessions failed to
establish, because the SSL handshakes failed.
This issue has been resolved.
Y Y Y Y Y Y - Y Y Y
CR00011300 User 2 Previously, if the router or switch was acting as an 802.1x authenticator, and it
received an illegal RADIUS packet (an Access-Reject packet with an EAP code of
“successful”), the router or switch would reboot.
This issue has been resolved. The switch now rejects such authentication
requests.
Y Y Y Y Y Y - Y Y Y
CR00011304 VRRP 2 VRRP did not function correctly when the switch was configured with protected
VLANs.
This issue has been resolved.
- - - Y Y Y - - - -
CR00011328 PIM 2 When the switch was using PIM to route multicast traffic, it sometimes rebooted
if the command show switch table=nh was entered.
This issue has been resolved.
- - - - - - - Y Y -
CR00011337 Environment
Monitoring
2 The switch did not record the system temperature, and therefore output of the
command show system displayed the temperature as 0°C.
This issue has been resolved.
- - - - - - - - - Y
CR00011345 MIB 2 The ATR enterprise MIB includes objects for managing ping operations. These
objects within the MIB are now fully supported.
Minor modifications have also been made to the MIB. Download the latest
atrrouter.mib file from
ftp.alliedtelesyn.co.nz/pub/ar-mib/atrouter.zip .
Y Y Y Y Y Y - Y Y Y
CR Module Level Description A
R
400
A
R
7x5
A
R
750
S
Ra
p
ie
r
i
AT
-8
8
0
0
AT
-8
6
0
0
A
T
-87
00X
L
AT
-8
9
4
8
AT
-9
9
0
0
AT
-9
8
0
0