Karcher BD 530 Bp - Manual (Page 29)

– 11
 Place bearing lid.
 Tighten the wing nuts.
 Turn the button for the setting of the ad-
vance speed in "– " direction.
 Raise the disk brush.
 Turn the disk brush by approx. 45° in
anti-clock-wise direction.
 Remove the disk brush at the bottom.
 Insert new disk brush in reverse se-
quence.
 Set the advance speed.
To ensure a reliable operation of the appli-
ance maintenance contracts can be con-
cluded with the competent Kärcher sales
office.
ƽ
Danger
Risk of injury. Before carrying out any tasks
on the device, switch off the button for
brush operations and suction turbine and
pull out the charger plug.
Caution
Risk of damage to the appliance on ac-
count of water leakage. Empty the waste
water reservoir and the fresh water reser-
voir prior to performing maintenance on the
appliance.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Replacing the disk brushes
Maintenance contract
Faults
29 EN