Karcher BD 530 Bp User Manual
Page 25

– 7
Caution
Risk of damage. Only use the recommend-
ed detergents. With respect to different de-
tergents the operator bears the increased
risk regarding the operational safety, acci-
dent risk and reduced product life of the ap-
pliance. Only use detergents that are free
from solvents, hydrochloric acid and hydro-
fluoric acid.
Follow the safety instructions for using de-
tergents.
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Open the cover of the fresh water reser-
voir.
Fill in fresh water (maximum 60 °C).
Add detergent. Follow dosing instruc-
tions for detergent.
Recommended detergents:
Detergents are available in specialised
stores.
Close the cover of the dirt water reser-
voir.
Raise the device slightly at the handle.
Pull out the lock.
Tilt the chassis to the desired position.
Put the lock.
Tilt the chassis downward and lock it.
Push the machine to the place where it
is to be used.
Tilt the chassis upward and lock it.
Switch on the button for brush opera-
tions and suction turbine
Note
If the brush motor does not run when
switched on, then brush motor is to be re-
leased by pulling the machine backward.
Perform the cleaning operation.
Reducing the speed: Turn the button in
"–" direction.
Increasing the speed: Turn the button in
"+" direction.
Filling in detergents
Application
Detergent
Regular cleaning
(even for floors sensi-
tive to alkalies)
RM 745
RM 746
Cleaning dirt from
grease
RM 69 ES ASF
RM 69 ASF
Basic cleaning (strip-
ping) of alkali-resistant
hard coatings
RM 752
Basic cleaning (strip-
ping) linoleum
RM 754
Sanitary cleaning
RM 25 ASF
Disinfection cleaning
RM 732
Cleaning
Chassis
Down
Transport
Up
Cleaning
Driving to the Place of Use
Cleaning
Set the advance speed (only
BD 530 BAT or BD 530 XL BAT)
25
EN