Karcher BD 530 Bp - Manual (Page 22)

– 4
1 Water quantity regulator
2 Switch for brush operations
3 Switch of suction turbine
4 Display
 Fasten the pushing handle using the
four screws that have been delivered
and fit the protective caps.
 Place long lateral boards of the packag-
ing as a ramp next to the pallet.
 Fix the ramp on the pallet with nails.
 Place short boards as a support under-
neath the ramp.
 Remove the wooden bars in front of the
wheels.
 Raise the cleaning head and remove
the cartonage.
 Push down the appliance through the
ramp from the pallet.
 Insert the vacuum bar into the vacuum
bar suspension in such a manner that
the profiled sheet is positioned above
the suspension.
 Tighten the cross-handles.
 Insert the suction hose.
The sweep brushes must be installed be-
fore the initial operation (see "Maintenance
work").
Please observe the following warning notes
when handling batteries:
Operator console
Before Startup
Unloading
Installing the Vacuum Bar
Installing the Brushes
BD 530 BAT/Package and/ or
BD 530 XL BAT/Package
Batteries
Observe the directions on the bat-
tery, in the instructions for use
and in the vehicle operating in-
structions
Wear eye protection
Keep children away from acid and
batteries
Danger of explosion
Fire, sparks, naked flames and
smoking must be strictly avoided
22 EN