Karcher HKF 50 E - Manual (Page 18)

18 English
We hereby declare that the machine de-
scribed below complies with the relevant
basic safety and health requirements of the
EU Directives, both in its basic design and
construction as well as in the version put
into circulation by us. This declaration shall
cease to be valid if the machine is modified
without our prior approval.
The undersigned act on behalf and under
the power of attorney of the company man-
agement.
Alfred Kärcher GmbH Co. KG
Alfred-Kärcher-Str. 28 - 40
D - 71364 Winnenden
Phone: +49 7195 14-0
Fax: +49 7195 14-2212
5.957-453
5.957-454
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
In the event of a warranty claim please con-
tact your dealer or the nearest authorized
Customer Service centre. Please submit
the appliance, including all accessories,
and the proof of purchase.
Troubleshooting
Fault Possible cause Remedy of whom
Motor does not turn. There is no voltage at the motor. Check fuse and cables. Electricians
Thermal protection switch in the
coil has triggered. Fix cause for overload. Electricians
Error current protective switch was
triggered. Remove cause and reset error current protective
switch. Electricians
No compressed air present or
pressure too low. Check compressed air supply. Operator
Compressed air supply line kinked. Check compressed air hoses. Operator
Motor does not turn, clean-
ing head does not turn Mechanical defect on:
– Coupling parts
– Drive shaft
– Gears Check parts and replace defective parts. Customer Service
Cleaning head turns too
abruptly Cleaning head touches container
wall. Change position of cleaning head and make
sure it can run smoothly. Operator
Worn drive discs cause increased
bevel play. Replace drive discs. Customer Service
Destroyed gears on bevel wheels. Replace bevel wheels. Customer Service
Uneven cleaning jet Spray nozzles clogged. Clean spray nozzles. Operator
Spray nozzles damaged. Replace spray nozzles. Operator
Accessories
Description Order No.
Maintenance unit for com-
pressed air (only for com-
pressed air drive) 6.610-020
Hole cone in PE design 5.132-016
Locking screw (for 1 noz-
zle operation) 5.411-061
Compressed air filter with
automatic condensate
drain (only for compressed
air drive) 6.414-154
Compressed air hose
(sold by the meter) 6.388-192
Exhaust air silencer with
oil separator on request
CE declaration
CEO Head of Approbation
HKF 50 E
Product: Internal cleaner
Type: HKF 50 E
Relevant EU Directives
98/37/EC (to 28.12.2009)
2006/42/EC (from 29.12.2009)
2006/95/EC
2004/108/EC
Applied harmonized standards
EN 55014–1: 2006
EN 55014–2: 1997 + A1: 2001
EN 60204–1
EN 61000–3–2: 2006
EN 61000–3–3: 1995 + A1: 2001 + A2:
2005
HKF 50 P
Product: Internal cleaner
Type: HKF 50 P
Relevant EU Directives
98/37/EC (to 28.12.2009)
2006/42/EC (from 29.12.2009)
94/9/EC
Applied harmonized standards
EN ISO 12100–1
EN ISO 12100–2
EN 1127-1: 1997
EN 13463-1: 2002
EN 13463-5: 2003
Applied national standards
-
ID no. of notified body
0123
TÜV SÜD
Ridlerstr. 65
80339 München
Test report no.
Ex5 0307 10088 097
Marking
II 1/2 G c T4
II 1/3 D c 120 °C
Warranty