elektraLite Moving Yoke 120v Spot - Manual (Page 3)

- ２ - MY575 SPOT
Safety Instructions.
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in
this user manual. MY575 is a high voltage fixture. Be careful when dealing with high voltages.
Please read this manual. If you do not read this manual and damages occur to MY575, then it could
void the warranty.
During shipping, MY575 may have been exposed to high temperature changes or humidity changes. So, as a
precaution, do not switch MY575 on immediately. Condensation can damage MY575 so leave MY575 switched
off until it has reached room temperature.
The electric connection must carry out by a qualified person and it is absolutely essential that MY575 be
grounded
.
Always disconnect MY575 from the power source, when the device is not in use or before cleaning it. Only
unplug MY575 from the power cord. Never pull out the plug out by pulling on the power cord.
Take care, MY575 will heat up when it is turned on and it will be very hot to touch.
Please keep MY575 away from children and the general public. Please be intelligent and use common sense
when operating MY575.
General Guidelines.
MY575 is a lighting fixture for professional use on stages, in clubs, theatres, etc.
MY575 should only be operated at 120 volts and only indoors.
MY575 should not be operated 24/7 (24 hours a day; 7 days a week). MY575 needs operation breaks to
ensure that it will work for a long time without problems. Please do not shake MY575 and avoid using brute
force when installing or operating it.
When choosing the location to install MY575, please make sure that it is not exposed to extreme heat, moisture
or dust. The minimum distance between MY575 and the illuminated surface must be more than 3 feet.
Always mount MY575 with an appropriate safety cable. If you use the quick lock cam to hang MY575, please
make sure the 4 quick lock fasteners are locked into position correctly.
Operate MY575 only when you are familiar with the features on the fixture. Do not permit operation by persons
not qualified for operating it.
All modifications to MY575 will invalidate the warranty. There are absolutely no exceptions.
If MY575 is operated in any way different to the one described in this manual, MY575 maybe damaged and the
guarantee will be void.