elektraLite Moving Yoke 120v Spot - Manual (Page 23)

- ２２ - MY575 SPOT
03Er:
(Rotating gobo indexing error 1) This message will appear after the reset of MY575 and if the
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or
its driver circuit on the main circuit card). The rotating gobo will not be located in the default position after the
reset.
04Er:
(Rotating gobo-wheel 2 error) This message will appear after the reset of MY575 if the magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its drive circuit on
the main circuit card). The fixed gobo wheel will not be located in the default position after the reset.
05Er:
(PAN-yoke movement error) This message will appear after the reset of MY575 if the yoke’s magnetic-indexing
circuit malfunction (sensor failed or magnet missing) or the stepping-motor is defective ( or its driving IC on the
main circuit card). The yoke will not be located in the default position after the reset.
06Er:
(TILT-head movement error) This message will appear after the reset of MY575 if the head’s magnetic-indexing
circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driving IC on the
main circuit card). The head will not be located in the default position after the reset.
08Er:
(Prism-wheel error) This message will appear after the reset of MY575 and if the magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the
main circuit card). The rotating gobo will not be located in the default position after the reset.
12Er:
(Iris error) This message will appear after the reset of MY575 and if the magnetic-indexing circuit malfunctions
(sensor failed or magnet missing) or the stepping-motor is defective (or its driver circuit on the main circuit card).
The iris will not be located in the default position after the reset.
14Er:
(Color-wheel 2 error) This message will appear after the reset of MY575 if the magnetic-indexing circuit
malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or its drive circuit on the
main circuit card). The color wheel will not be located in the default position after the reset.
15Er:
(Rotating gobo indexing error 2) This message will appear after the reset of MY575 and if the
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepping-motor is defective (or
its driver circuit on the main circuit card). The rotating gobo will not be located in the default position after the
reset.